©Roto VR is a UK Ltd company. Companies House: 9473421. VAT Reg: 241423444.
28 Church Road, Stanmore, Middlesex, HA7 4XR, United Kingdom www.rotovr.com
16
Accessories Setup & Recommended Accessories
Your accessories set has come in Box 3. Please note that this does not include the steering
wheels/HOTAS controllers, but the parts in which to mount them to the chair.
Side Tables
Out of all the accessories, this is the easiest to set up. The side tables have a metal part on
each that slot into a specifically designed area on the armrests. Coming down so that your
eye level is in line with the arm makes the hole easier to see.
There is a lever on the bottom that you will need to pull down when inserting the arm into
the chair. This lever has a post on it, which slots into a hole in the side table, ensuring that it
cannot be pulled or moved while gaming.
To remove the side table, pull and hold the same lever down and slide the side table out of
the armrest.
Racing Pack
It’s worth noting that the racing pack will only work with those headsets that ca
n be wired
through the chair (sorry Oculus Quest/Go users!).
To attack the racing pack to the chair, you will first need to pop off the cover on the front of
the foot pedals.
You will then need to insert the bottom pole (it has a ridge along it and is the shorter of the
two) into the hole. Please ensure that this is pushed in fully. There is a small cover just
behind the pedals that will need to be removed, and the pole can then be screwed in place.
The pole will then need the right-angle bracket attaching on to it (this is the one with the
hinge closing). Once it is in the desired place, two screws will need to be inserted to hold it
in place.
The pedal board will then need to be placed on the end of the pole and screwed into place.
Into the right-angle bracket, the longer pole will need to slide into the top and be screwed in
place. Pulling the handle out will allow you to slot the top table in, and the racing pack will
be ready for your steering wheel and pedals to be mounted on it!
If you would like to see this done in a video, please click
