7
DE
7
Funktionsweise
Das Ortungsgerät erzeugt mithilfe einer Sensorspule ein stabiles elektromagnetisches
Feld. Dieses Magnetfeld induziert Wirbelströme in das Prüfobjekt.
Da unterschiedliche Materialien elektromagnetische Mikrowellen unterschiedlich
absorbieren, ermöglicht dies dem Benutzer nicht nur das geortete Objekt, sondern auch
die relative Entfernung und Position des Objekts zu bestimmen.
Batterien einsetzen / wechseln
Das Ortungsgerät ist batteriebetrieben, eine 9 Volt Blockbatterie ist zu verwenden.
Bei Erstinbetriebnahme und wenn sich das Ortungsgerät bei verbrauchter Batterie
nicht mehr einschalten lässt, oder die Batterieanzeige am Display blinkt, ist die Batterie
einzusetzen bzw. zu wechseln. Gehen Sie dazu wie folgt vor:
Ein- und Ausschalten
Mit Drücken der Ein-/Aus-Taste schalten Sie das Ortungsgerät ein. Um das Ortungsgerät
auszuschalten, drücken Sie die Ein/Aus-Taste (5) erneut. Nach fünfminütiger Inaktivität
schaltet es sich von selbst aus.
Hinweis: Beim Start befindet sich das Gerät standardmäßig im Metallortungsmodus.
- Öffnen Sie den Batteriefachdeckel, indem
Sie ihn bei der Arretierung hochheben
- Nehmen Sie ggf. die verbrauchte Batterie
heraus.
- Setzen Sie eine neue 9 Volt Blockbatterie
ins Batteriefach ein. Achten Sie dabei auf
die Polaritätsmarkierung im Batteriefach.
- Schließen Sie den Batteriefachdeckel.
Weitere Hinweise zu der Verwendung und Pflege von Batterien finden Sie im Abschnitt
Wartung und Reinigung.
Vorbereitung für die Inbetriebnahme
Inbetriebnahme
1500001135_Anleitung_DE,GB,FR.indb 7
03.07.15 09:48