A d v a n t a g e s
The SANICUBE tank is a combination of a hot
water indirect cylinder and instantaneous
water heater. In this entirely new design
concept lie the special advatages of the
SANICUBE tank:
Hygienically optimised water
With the SANICUBE hot water indirect
cylinder, slow-flowing or inadequately heated
volumes of sanitary water are avoided
altogether. Deposits of sludge, rust or other
sediments, which can occur in large-capacity
tanks, cannot arise. In addition, the water
which is stored first is also discharged first
(first-in-first-out principle). The hygienic
advantages of the SANICUBE tank are
considerable.
Corrosion and maintenance free
The storage tank and the sanitary water heat
exchanger are made of plastic and are
therefore not subject to any corrosion. No
protective anode or similar corrosion inhibiting
device is necessary. With the SANICUBE tank,
maintenance operations, such as the
replacement of protective anodes or the
cleaning of the tank, are entirely unnecessary.
Minimal limescale
In the stored water compartment, it is only
possible for limescale to be deposited in the
initial phase of its use. As a result, the
immersion tube and all of the heat exchanger
pipes in the stored water remain clean. Even in
the sanitary water compartment of the
PE-X-pipe heat exchanger, the normally high
flow rates and smooth surface of the pipes
themselves prevent the accumulation of
limescale.
For hard water we recommend stopping
the pressure reduction from the general
supply to the house water supply ONCE a
year in order to flush the tank with a
higher pressure.
Economical operation
The all-round thermal insulation of the storage
tank ensures minimal losses when in
operation. The energy requirements for the hot
water generation are therefore kept at a
minimum.
[
3
]
