7 Installation
Installer reference guide
32
RRLQ004~008CA + RHBH/X04+08CB
ROTEX HPSU low temperature Bi‑bloc
4P384979-1 – 2015.01
Typical workflow
Mounting the indoor unit typically consists of the following stages:
1
Installing the indoor unit.
2
Installing the drain pan kit (optional).
7.4.2
Precautions when mounting the indoor
unit
INFORMATION
Also read the precautions and requirements in the
following chapters:
▪ General safety precautions
▪ Preparation
7.4.3
To install the indoor unit
CAUTION
Do NOT grasp the piping to lift the indoor unit.
1
Lift the unit from the package.
60kg
2
Remove the 4 screws from the bottom of the unit. Unhook and
remove the side plates.
1
2
5×
3
3
3
Put the installation pattern (see packing) on the wall and follow
the steps as shown below.
2×
2
1
3
4
4
Lift the unit.
1
2
5
Tilt the top of the unit against the wall at the position of the 2
inserted screws.
6
Hook the unit against the wall.
2
1
2×
3
2×
7
Assemble the unit.
1
2
1
2
2
2
