32
• Press the service button (7) ca. 4 sec. The
symbol blinks.
• Empty the drip pan (9b) and slide it back in. The
symbol blinks and the
sym-
bol lights up.
• Remove the water tank (17) and fill it with decalcifying liquid along with the correct
amount of water to fill it to the 0.5 l mark. (Follow the manufacturer's instructions.)
• Replace the tank. The
symbol blinks.
TIP:
Place a sufficiently large receptacle (ca. 0.5 l) under the steam/hot water jet (12).
• Open the steam/hot water dial (11) by turning it clockwise.
• The coffee machine will automatically decalcify and the solution will flow through
the hot water jet (12) in intervals (ca. 10 min.). The
symbol blinks during this pro-
cess.
• As soon as the
symbol blinks again, you can close the dial (11) again.
• The decalcifying solution will now flow through the inner outlet in intervals (ca. 15 min.).
• As soon as the last of the solution has flowed through, the
symbols blink.
• Remove the drip pan (9b) and the water tank (17) and empty everything.
• Fill the tank with fresh water and replace it as well as the pan. The
symbol blinks.
• Open the steam/hot water dial (11) by turning it clockwise.
• The system will be rinsed again through the steam/hot water jet (12) in intervals (ca.
5 min.).
• As soon as the
symbol blinks again, you can close the dial (11) again.
• The system is rinsed through the inner outlet in intervals (ca. 5 min.).
• As soon as the rinse process is done, the
symbol blinks.
• Empty the drip pan (9b) and reinsert it.
• The system will heat up briefly. The service button (7) will blink afterwards.
• Press the service button (7) and the system will be rinsed through the coffee outlet (8).
• Your coffee machine is ready for operation again.
Manual decalcifying
If you want, you may start the decalcifying program without a prior alarm showing:
• Using the on/off button (2), switch your coffee machine ON (operation mode).
• Press the service button (7) for about 4 sec. The
symbols light up one after
another.
• Wait until the
symbol lights up and press the service button (7) briefly to confirm.
The
symbol begins to blink.
• Press the service button (7) again for ca. 4 sec. The
symbol blinks.
• Continue as described above for «Empty the drip pan...»
☛
If you start the manual decalcifying program by accident, you may interrupt it
by pressing the on/off button (2) for ca. 4 sec.
