30
5. Maintenance and care
5.1 Filter use
☛
Please read chapter 4.1 Filter (page 27) on filter use.
5.2 Changing filter
The effectiveness of the filter is exhausted after about 50 l of water. The
symbol
lights up and the service button (7) blinks.
TIP:
Press the service button only when you want to change the filter.
☛
You can continue to brew coffee or draw hot water and steam. However, we
recommend that you change the filter immediately.
• Press the service button (7) ca. 4 sec. The
symbols blink.
• Empty the water tank (17) and change the filter.
• Fill the tank with freshwater and put it back into the coffee machine.
• Hold a receptacle under the steam-hot water jet (12) and turn the steam/hot water
dial (11) to the right. The system will be rinsed.
• Wait until no more water comes out of the jet and then turned the dial (11) back to
the left.
• The system will be heated up briefly (
blinks) and is then ready for operation. The
normal symbol for brewing coffee appears on the screen.
Rinsing filter by hand
☛
You must change the filter after two months of the latest even when your coffee
machine is used just a little. You will not see a symbol in the display, and you
must rinse the new filter by hand.
☛
You can set the date for change in the filter using the special indicator on top of
the filter.
• Using the on/off button (2), switch your coffee machine ON (operation mode).
• Press the service button (7) for about 4 sec. The
symbols light up one after
another.
• Wait until the
symbol for Filter lights up and press the service button (7).
• The
symbol begins to blink.
• Press the service button (7) for ca. 4 sec. The
symbols blink.
• Continue as described above for «Empty the water tank...»
5.3 Cleaning program
If the coffee machine needs to be cleaned, the
symbol appears and the service
button (7) blinks.
TIP:
Press the service button only when you want to start cleaning.
