Rotec MDR-42, Руководство пользователя, Страница: 68 / 91

MDR-42 Technical Data
ROTEC technology - 66 -
Exclude from boot order:
USB FDC: <USB Floppy drive>
USB HDD: <USB Hard Drive device>
USB ZIP: <USB ZIP drive>
USB LS-120: <USB CDROM device>
PCI BEV: <PCI LAN device>
PCI SCSI: <PCI SCSI device>
Bootable Add-in Cards
Notes: The standard 1.44MB floppy drive is referenced as Legacy Floppy Drives.
The BIOS only tries to boot from the devices (max 8) in the Boot Priority Order list.
The above menu is only available on ETX-PM modules that have BIOS version MODBr111.wph or later.
9.11.7.3. Boot First Menu
Display the Boot First Menu by pressing <Esc> during POST. In response, the BIOS displays the
message
Entering Boot Menu
and then displays the Boot Menu at the end of POST. Use the menu to
select one of the following options:

Override the existing boot sequence (for this boot only) by selecting another boot device. If the
specified device does not load the OS, the BIOS reverts to the previous boot sequence.

Enter Setup.

Press <Esc> to continue with the existing boot sequence.
9.11.8. Exit Menu
The following sections describe the five options in Exit Menu. Pressing <Esc> does not exit this menu.
You must select an item from the menu to exit.
Exit Saving Changes
Saves all selections and exits setup. Upon reboot, the BIOS configure the system according to the
setup selection stored in CMOS.
Exit Discarding Changes
Use this option to exit Setup without storing new selections in CMOS. Previous selections remain in
effect.
Load Setup Defaults
Select to display the default values for all Setup menus.
Discard Changes