Rotec MDR-42, Руководство пользователя

Страница: 59 / 91

Technical Data
MDR-42
- 57 - ROTEC technology
Mode Normal, IrDA Set the mode for serial port B.
Base I/O address
3F8h, 2F8h, 3E8h,
2E8h
Select I/O base of port.
IRQ (port A and B) IRQ 3, IRQ 4 Select IRQ of port A and B
*Onboard LPT Disabled Enabled
Auto Disabled turns off the port. Enabled requires end
user to enter the base I/O address and the IRQ.
Auto makes the BIOS configure the port.
*Mode Output only Bi-
directional EPP
ECP Set the mode for the parallel port.
*Base I/O address 378h, 278h, 3BCh Select I/O base of port.
*IRQ IRQ 5, IRQ 7 Select IRQ of parallel port.
*DMA DMA1, DMA3 Select DMA channel of port if in ECP mode.
Notes: In the Option column, bold shows default settings. The FDC and LPT settings marked with an
asterisk () are mutually exclusive. The FDC or the LPT settings are visible, depending on a
configuration resistor on the OEM backplane. If FDC is selected, the FDC signals are available at the
LPT port (external floppy). Only Drive B (MOD1/DRV1) is supported, but the drives are internally
swapped to let the drive appear as Drive A. **The USB ports are multiplexed between UHCI and
EHCI. Ports are routed to EHCI if an USB 2.0 high-speed device is connected and an EHCI driver is
loaded. If you want to use the USB boot feature, enable USB BIOS Legacy Support.
9.11.4.7. Keyboard Features Submenu
Feature Option Description
Numlock Auto On Off On or Off turns NumLock on or off at bootup.
Auto turns NumLock on if it finds a numeric
key pad.
Key Click Disabled Enabled Turns audible key click on.
Keyboard auto-repeat rate 30/sec, 26.7/sec,
21.8/sec, 13.3/sec,
10/sec, 6/sec, 2/sec Sets number of times to repeat a keystroke
per second if you hold the key down.
Keyboard auto-repeat
delay ¼ sec, ½ sec, ¾ sec,
1 sec Sets delay time after the key is held down
before it begins to repeat the keystroke.
Note: In the Option column, bold shows default settings.
9.11.4.8. Hardware Monitor Submenu
This submenu shows the current voltages and temperatures of the system.