Rotec MDR-42, Руководство пользователя

Страница: 58 / 91

MDR-42 Technical Data
ROTEC technology - 56 -
D000
– D3FF D400 – D7FF
D800
– DBFF DC00 – DFFF
Disabled Write
Through Write
Protected Write
Back Disabled: block is not cached.
Write Through: Writes are cached
and sent to main memory at once.
Write Protect: Writes are ignored.
Write Back: Writes are cached, but
not sent to main memory until
necessary.
Notes: In the Option column, bold shows default settings.
9.11.4.6. I/O Device Configuration Submenu
Feature Option Description
Local Bus IDE adapter Disabled Primary
Secondary Both Enables onboard PCI IDE device.
Primary IDE UDMA66/100 Enabled Disabled Disabled limits max. transfer mode to UDMA33.
Enabled allows UDMA66 and above.
Secondary IDE
UDMA66/100 Enabled Disabled Disabled limits max. transfer mode to UDMA33.
Enabled allows UDMA66 and above.
USB UHCI Host Controller 1 Enabled Disabled Enable/ Disable UHCI 1 HC = USB ports 0 and 1.
USB UHCI Host Controller 2 Enabled Disabled Enable/ Disable UHCI 2 HC = USB ports 2 and 3.
USB EHCI Host Controller ** Disabled Enabled Controls USB 2.0 functionality.**
Legacy USB Support Disabled Enabled Enable support for USB keyboard and mice and
boot from USB mass storage devices.
AC97 Audio Controller Disabled Enabled Enable the AC97 Audio device.
Onboard LAN Controller Disabled Enabled Enables the ICH4 internal LAN controller.
Onboard LAN PXE ROM Disabled Enabled Enables the remote boot BIOS extension for the
onboard LAN controller.
*Onboard FDC Disabled Enabled Enables the onboard FDC controller.
Serial port A Serial port B Disabled Enabled
Auto OS Controlled Disabled turns off the port. Enabled requires end
user to enter the base I/O address and the IRQ.
Auto makes the BIOS configure the port. OS
Controlled lets the PnP OS configure the port after
bootup.