Interfaces
iPC12
- 13 -
ROTEC
technology
5. Interfaces
5.1. Video-In
The Video-In Interface is realized using a Conexant CX23883 PCI Video Decoder, that provides depending on
configuration four FBAS signal inputs (multiplexed on one A/D-Converter) or three FBAS and one S-Video
input.
Note: The Video-In ist not available on the light version
5.2. PS/2 Keyboard
The keyboard uses I/O and IRQ resources. The BIOS allocates the resources during POST configuration. The
resources are set to be compatible with common PC/AT settings. Use the BIOS setup to change some key-
board-related parameters.
5.3. PS/2 Mouse
The mouse uses I/O and IRQ resources. The BIOS allocates the resources during POST configuration. The
resources are set to be compatible with common PC/AT settings. You can change some mouse-related para-
meters from the BIOS setup.
5.4. Serial Port 1 (COM1)
The serial-communication interface uses I/O and IRQ resources. The resources are allocated by the BIOS during
POST configuration and are set to be compatible with common PC/AT settings. Use the BIOS setup to change
some parameters that relate to the serial-communication interface.
5.5. Parallel Port (LPT1)
The parallel-communication interface uses I/O, IRQ, and DMA resources. The resources are allocated by the
BIOS during POST configuration and are set to be compatible with common PC/AT settings. You can change
some parameters of the parallel-communication interface through the BIOS setup.
