1
Use these instructions to properly use, operate and care for your Area 53 Bimini.
Remove the quick release pins and allow the frame to
rotate into your boat.
Fold the middle bow against the front bow and roll your
fabric around both. Zip the boot over your fabric and frame.
Fold the bimini up against the tower.
Secure your folded bimini to the tower with the 2 tie down
straps on the boot. Adjust straps so they have some tension. The
bimini should rest of the navigation light mount.
Re-insert quick
release pins.
Bimini Boot
Quick Release
Pin
2
Unfold the frame from the tower. Unzip and remove the
bimini boot from the bimini frame. Unroll your fabric and
middle bow.
Rotate the frame upwards and insert the quick release
pins through the frame and stainless fitting.
Place the fabric over the tower and secure it along the rear
tower tube using the 12 Velcro straps. To get optimal fabric fit
you should attach the Velcro straps starting with the center
ones and working your way to the outer ones. Readjust as
necessary.
Bimini Boot
Quick Release
Pin
7
Area 53 Bimini Usage Instr
u
ctions
www.roswellmarine.com
Undo all 12 velcro straps securing the fabric to the tower
and frame.
Bimini Stowage
Undo the 2 straps that secure the bimini to your tower.
Bimini Deployment
1.
3.
2.
4.
1.
3.
2.
4.
