Ross TRA-8206, Руководство пользователя

Страница: 29 / 40

TRA-8206 User Manual (Iss. 05) Menus • 4–3
Dashboard Control System Software
This section briefly summarizes the menus, items, and parameters available from the DashBoard
Control System™ for the TRA-8206. Parameters marked with an asterisk (*) are the factory
default values.
The DashBoard Control System™ enables you to monitor and control openGear frames and cards
from a computer. DashBoard communicates with other cards in the DFR-8300 series frame
through the Network Controller Card.
Status Tabs
Table 4.1 summarizes the Status tabs available in DashBoard for the TRA-8206.
Table 4.1 Status Tab Items
Tab Title Item Parameters Description
Product
(Read-only)
Product TRA-8206
Supplier Ross Video Ltd.
Board Rev ##
Serial Number ######
Software Rev ##.## Indicates the software version
Hardware
(Read-only)
Voltage (mV) # Supply Voltage
Current (mA) # Current consumption of card
Rear Module # Type of rear module in the slot
CPU Headroom # Processing power available
RAM Available #/## On-board processing memory available
EE Bank # Storage count
Signal
(Read-only)
Signal Status
Green - OK All channels are passing a valid signal
Red - Input Unlocked (A/B/C)
The indicated channel(s) cannot reclock
due to an invalid signal or rate setting
Input A Status
Locked - # MHz Input is valid with the specified bit rate
Bypass
Signal is present, channel configured to
Bypass Mode and is not reclocked
Not routed Input is not routed to any output BNCs
No signal No signal present
No signal - muted No signal present and the output is muted
Unlocked Input is present, PLL is unlocked
Unlocked - muted
Input is present, PLL is unlocked, and the
output is muted
Input B Status Same as above
Input C Status Same as above