Ross TRA-8206, Руководство пользователя

Страница: 30 / 40

4–4 • Menus TRA-8206 User Manual (Iss. 05)
Setup Menus
Table 4.2 summarizes the Setup Menu options available in DashBoard for the TRA-8206.
Routing Menus
Table 4.3 summarizes the Routing menu options available in DashBoard for the TRA-8206.
Note that if the associated jumper for the BNCs is set to INT or is removed, the BNCs will output
the signal input on Channel A.
Table 4.2 Setup Menu Items
Tab Title Item Parameters Description
Setup
Channel A Input Rate
a
a. When Auto is selected as an input rate, the data rate of 177MHz is not detected.
Auto*
The card automatically detects the
incoming data rate for the specified
channel
Bypass
The card does not reclock the input rate
for the specified channel
# MHz
Channel B Input Rate Same as above
Channel C Input Rate Same as above
Low Signal
Mute
b
b. The Mute option is recommended if you have input channels set to any rate other than Auto Mode. The output of the card would
then mute if an incorrect data rate is applied to the input, or if the input signal became too weak for the input equalizer to compensate
The channel outputs are muted if the input
signal degrades to the point that the input
EQ can no longer guarantee error-free
performance
Pass*
The channel outputs work to the limits of
the input stage
Edit Permission
(
JP1
is set to Remote )
Unlocked* All editable menu options are editable
Locked
All editable menu options, except this one,
are locked and are read-only
Edit Permission
(
JP1 is set to Local )
Local Only*
All editable menu options are locked and
are read-only
Factory Defaults Reset Resets all parameters to factory defaults
Table 4.3 Routing Menu Items
Tab Title Item Parameters Description
Routing
Output BNC 2 & 4
Input A*
BNC 2 and BNC 4 will output the signal
input on Channel A
Input B
BNC 2 and BNC 4 will output the signal
input on Channel B
Input C
BNC 2 and BNC 4 will output the signal
input on Channel C
Output BNC 3 & 5 Same as above
Output BNC 6,7,8,10 Same as above