Ross QRA-8808, Руководство пользователя

Страница: 24 / 32

24 • DashBoard Menus QRA-8808 User Guide (v5.0)
Hardware Tab
Table 8.2 outlines the read-only information displayed in the Hardware tab.
Output Locked - 270M Reclocker locks at 270Mbps data rate
Locked - 1.5G Reclocker locks at 1.485Gbps data rate
Locked - 3.0G Reclocker locks at 2.97Gbps data rate
Unlocked (muted) Reclocker is enabled and unlocked. The output is
automatically muted.
Reclocker bypassed Input signal is present and the reclocker is
bypassed (the Enable Reclocker check box is not
selected in the Setup tab)
No signal (muted) Input signal is not present and the output is
automatically muted
Input Cable Length (m) x (1694A) / y (1855A) Indicates the approximate cable length used for the
input signal where:
x represents the Belden 1694A length
y represents the Belden 1855A length
N/A One of the following is occurring:
a valid input source was not detected on the input
BNC
the Enable Equalizer check box is not selected in
the Setup tab
Table 8.2 Hardware Tab Items
Item Parameter Description
HW Status OK (Green) The rear module installed with the card is
supported and the card is operating correctly
Incomp Rear Module (Red) One of the following is occurring:
• an unsupported rear module is installed with the
card
• the card is installed in the wrong frame slot
(where the card does not align with the connector
on the rear module
Voltage (mV) # Supply voltage
Current (mA) # Current consumption of card in milliamperes
CPU Headroom # Processing power available
RAM Available # On-board processing memory available
Uptime (h) # Displays the number of hours since the last reboot
of the card
Configuration Bank # Storage count
Table 8.1 Signal Tab Items
Item Parameter Description