Ross NK-16, Руководство пользователя

Страница: 89 / 108

NK Series User Guide (1.0) Operation • 5–11
Figure 5.1
NK-A64 Control Layer Block Diagram
Signal processing is conducted by way of a Control Layer. The Control Layer is an additional level within the router
matrix that may be mapped to control panel keys to allow users to mix audio channels on the fly. The Control Layer
uses SOURCE keys as the triggers to mix the output audio signal. The Control Layer may be used after a source has
been switched to a selected destination.
Table 5.1
shows the audio mixing options available for the Control Layer.
Control Layer Operation via NK Control Panels
The Analog Audio Control Layer can easily be accessed from NK Series control panels. Factory configured
systems will allow the NK-A64 Control Layer to operate out of the box. Further configuration of the NK-A64
Control Layer and control panel options requires the NK-IPS.
Table 5.1 Audio Mixing Options
Input Control
Signal Processing
Description Left Channel Right Channel
Input 1 L R Both channels normal (Default)
Input 2 R L Channels swapped
Input 3 L L Both channels Left
Input 4 R R Both channels Right
Input 5 L R Left channel normal, Right channel inverted
Input 6 L R Left channel inverted, Right channel normal
Input 7 L+R L+R Left channel sum (mono), Right channel sum
(mono)
Input 8 L+R L–R Left channel sum (mono), Right channel
difference
Right Channel
Output
Left Channel Input
Router Matrix
(Right)
Router Matrix
(Left)
Control Layer
Right Channel Input
Left Channel
Output
USO
RESTRITO