manualshive.com logo in svg

Ross NK-16, Руководство пользователя

Поделиться
Скачать
Ross NK-16 Скачать руководство пользователя страница 2

NK Series · User Guide 

• Ross Part Number:

 9807DR-0100-1.0

• Release Date: March 18, 2011. Printed in Canada.

The information contained in this Guide is subject to change without notice or obligation.

Copyright

© 2011 Ross Video Limited

. All rights reserved.

Contents of this publication may not be reproduced in any form without the written permission of Ross Video 
Limited. Reproduction or reverse engineering of copyrighted software is prohibited.

Patents

This product is protected by the following US Patents: 4,205,346; 5,115,314; 5,280,346; 5,561,404; 7,034,886; 
7,508,455; 7,602,446; 7,834,886. This product is protected by the following Canadian Patents: 2039277; 1237518; 
1127289. Other patents pending.

Notice

The material in this manual is furnished for informational use only. It is subject to change without notice and should 
not be construed as commitment by Ross Video Limited. Ross Video Limited assumes no responsibility or liability 
for errors or inaccuracies that may appear in this manual.

Trademarks

•

 is a registered trademark of Ross Video Limited.

• Ross, ROSS, and ROSS

®

, are registered trademarks of Ross Video Limited.

• Microsoft, Encarta, MSN, and Windows are either registered trademarks or trademarks of Microsoft Corporation 

in the United States and/or other countries.

• All other product names and any registered and unregistered trademarks mentioned in this guide are used for 

identification purposes only and remain the exclusive property of their respective owners.

®

USO 

RESTRITO

Содержание NK-16













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды