manualshive.com logo in svg

Ross NK-16, Руководство пользователя

Поделиться
Скачать
Ross NK-16 Скачать руководство пользователя страница 41

NK Series User Guide (1.0)

Installation • 3–25

Figure 3.44  

Parallel to Serial Converter

To connect the NK-SCP/K2 to the Geneos CPU:

1.

Connect the DB-37 connector of the Parallel to Serial Converter to the Router Control Port on the rear of the 
Geneos CPU.

2.

Connect to DB-25 connector of the Parallel to Serial Converter to the Auxiliary Port on the rear of the Geneos 
CPU.

3.

Connect the single DB-9 connector of the Parallel to Serial Converter to the DB-9 connector of the 
NK-SCP/K2. Alternatively, this connector can be connected to the Kondor 2 frame itself, and the NK-SCP/K2 
connected to the frame via a serial cable.

4.

Connect either the linked DB-25 or the DB-9 to a PC for Geneos software configuration and control.

Connecting the NK-SCP to the T-Bus Control System

To connect the NK-SCP/K2 or NK-SCP/A to the T-Bus Control System follow the steps below:

1.

Connect one end of a straight through CAT5 cable to the RJ-45 connector on the SCP.

2.

Connect the other end of the CAT5 cable to any available T-Bus port on the NK-IPS, or any other T-Bus 
compatible device connected to the NK-IPS.

Connecting the NK-GPI

The NK-GPI connects to the T-Bus control system using the RJ-45 connectors on the box edge. The loop through 
connector allows the NK-GPI to reside at any point on the control bus. The NK-GPI connects to general purpose 
interface inputs and outputs via a DB-37 port. 

The NK-SCP/K2 can be connected to the Geneos CPU at any time, but to ensure status updates are 
completed, it is recommended that it be connected after configuration details have been entered on both 
the Device Properties page via the NK-IPS, and the Geneos Software.

DB-37 Male

Parallel to Serial Converter
to the Router Control Port on CPU

DB-9 Male

RS-485 Serial Control
to the Kondor 2

Power Cable

for Parallel to Serial Converter

DB-25 & DB-9 Female

to the PC Communications Port

DB-25

to AUX connector on CPU
(Power & PC Communications)

USO 

RESTRITO

Содержание NK-16













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды