manualshive.com logo in svg

Ross NK-16, Руководство пользователя

Поделиться
Скачать
Ross NK-16 Скачать руководство пользователя страница 71

NK Series User Guide (1.0)

Configuration • 4–25

Device Properties Fields

Family

The Family name is set in the factory before shipping and displays the family that the device belongs to. This 
parameter is read-only.

Device

The Device name is set in the factory before shipping and displays the name assigned to the device. This parameter 
is read-only.

Serial Number

The Serial Number is set in the factory before shipping and is unique to each device. This parameter is read-only.

Name

The Name field can be assigned by the user to uniquely name a device. This field has a maximum of 16 characters 
and is used for description and identification only.

Details

The Details field can be assigned by the user to give a device specific details. For example, a physical location or a 
brief description of its use. This field has a maximum of 16 characters and is used for description and identification 
only.

Group

The Group number can be assigned by the user to organize devices into groups. For example, users can assign 
separate Group numbers for devices in different physical areas. This field has a maximum of 10 characters and is 
used for description and identification only.

Configuration Fields

Address

The Address is used within the overall control system to identify devices. Each device must be given a unique 
Address to avoid hardware and communication conflicts. The valid value range for assigning an individual device 
Address is 2-255.

Machine Control Enabled

Machine Control Enabled allows reciprocal switching when the check box is checked. By default, Machine Control 
Enabled is turned off.

USO 

RESTRITO

Содержание NK-16













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды