Ross Abekas Tria News, Руководство пользователя

Страница: 50 / 59

7. In the Edit Timing area, select a timing offset for when you are controlling the server from an external editor over
serial.
•
Timecode Alignment — select the offset, in frames, of the timecode information that is sent to the editor
during playout or record.
• Source Alignment
— select the offset, in frames, of the timecode information that is sent to the editor during
playout.
• Out Point Offset — select the offset, in fields, of the out-point timecode value that is sent to the editor during
record.
8. In the Video Edit Effect area, select which tracks get recorded when an external editor issues the Video Record
command to the server.
•
Edit Video Track — only the video track is recorded.
9. In the VDCP Configuration area at the bottom of the window, select specific configurations for the protocol you
are using.
• Select
Louth Preview
to allow clips to be pre-cued in the background for seamless back-to-back transitions
during playout.
• In the Maximum length of Clip Name field, select the maximum length of a clip name that is reported to the
controlling device.
10. Click on the Ch-
X
: list and select the room that you want to assign to the channel.
11. Click Restart Tria . A confirmation dialog box is displayed.
12. Click Restart Tria to restart the server application and services with the new setting.
13. Click OK when the restart has completed to dismiss the window.
To Configure a Room for the AMP Protocol
Set up a Room to use the AMP protocol to control server channels.
Note: When controlling the server from a remote device over ethernet, you must select the port on the server corresponding to the
channel you want to send commands to. Channel transport A = port 8000, channel transport B = port 8001, and so on.
1. Launch the Tria Config application.
You may be prompted to allow the program to make changes on the computer, click
Yes
.
50 • Remote Control Support — Tria News User Manual