manualshive.com logo in svg

Ross Abekas Tria News, Руководство пользователя

Поделиться
Скачать
Ross Abekas Tria News Скачать руководство пользователя страница 5

Important: 

 This is a Class A product. In domestic environments, this product may cause radio interference, in which case the

user may have to take adequate measures.

Safety and First Aid

Ross

®

 Abekas

®

 equipment is designed to the highest standards of quality and reliability. However, no matter how these

systems are designed, operators and maintenance personnel can be exposed to electrical shock hazard when protective

covers are removed for maintenance or the installation of options. With this caution in mind, each operator and engineer

must observe all safety regulations, and have a clear understanding of first aid procedures related to electrical hazards.

Safety and Compliance Certifications

• Certified to IEC/EN-60065, EN-55032, and EN-55024

Power Information

To ensure safe operation and to guard against potential shock or risk of fire, ensure your AC power source for the system

is within the required voltage range and frequency.
• AC Voltage Input (Auto-Ranging): 100VAC through 240VAC
• Input AC Frequency Range (nominal) 60Hz — 50Hz
• Input AC Power Requirement at 110VAC: ~3.5A Maximum
• Input AC Power Requirement at 240VAC: ~1.5A Maximum

Operating Environment

The optimum operating environment is within the following ranges:
• Recommended Operating Temperature: 13°C to 35°C (55°F to 95°F)
• Recommended Operating Humidity: 20% to 80% non-condensing

Note: 

 High temperature/humidity should be avoided at all times.

Safety Information

Important Safety Notices

This system complies with safety standard IEC/EN60065. To ensure safe option and to guard against potential shock

hazard or risk of fire, the following must be fulfilled:
• This system features auto-ranging power supplies. Ensure that your power source is within the correct range of

voltage and frequency, as required by the system.

• Each chassis in this system must be electrically grounded by connecting the input power cord(s) to a correctly wired

and grounded power outlet.

Warning: 

 Completely disconnect all input AC power cords from the chassis before removing the top cover from the chassis.

Failure to do so will expose dangerous electric currents and voltages. Physical contact with these electric currents and

voltages is extremely dangerous and may result in severe physical injury or death! Only qualified service personnel should

remove the top cover from the chassis.

Warning Hazardous Voltages: 

 Modules marked with this symbol may be removed while the system is operating (powered).

After removing a module, beware of dangerous electric currents and voltages that are exposed on the module receptacle

connector inside the chassis. Please keep fingers, tools, and foreign metal objects away from the exposed receptacle

connector while the chassis has input AC power applied. Physical contact with these electric currents and voltages is

extremely dangerous and may result in severe physical injury or death! Only qualified service personnel should remove these

modules.

Tria News User Manual — Document Information • 

v

Содержание Abekas Tria News




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды