Ross Abekas Tria News, Руководство пользователя

Страница: 12 / 59

Audio Setup
You can select how audio is muted and which audio channel to monitor from the analog audio out headphone jack.
To Configure the Audio Setup
Select the number of tracks to record and which tracks are sent to the headphones jacks.
1. Launch the Tria Config application.
You may be prompted to allow the program to make changes on the computer, click Yes .
2.
Click the Audio tab.
3. In the Audio Muting Policy area, select how the audio output (AES, embedded, and analog audio out) is muted
during playback.
•
Mute everything except 100% play speed and JOG STEP — audio is muted at all play speeds except 1×
(100%) and during single-frame jogging.
• Mute everything except 100% play speed. Mute JOG STEP — audio is muted at all play speeds except
1× (100%).
• Mute when speed is not in the range 85% through 115% of play speed — audio is muted at all play
speeds except in the range of 85% to 115% play speed.
•
Mute when playback speed exceeds 200% play speed. — audio is muted only when play speed exceeds
2× (200%).
4. In the Analog Audio Monitor area, select the channel transport audio that you want to monitor on the analog
audio output headphone jack. Only audio tracks 1 and 2 are available on the analog audio output port.
5. Click Apply .
Audio Router Setup
There are two integrated audio routers built into the server. An input router that sends audio from an audio input to any
channel transport, and an output router that sends the audio from a channel transport to any audio output. The number
of audio inputs and outputs depends on the options you have installed in your server. Audio sources and destinations
include embedded audio and AES audio on the TASCAM ® AES-59 DB25 ports on the back of the server.
To Configure the Audio Router
The Audio Input Router tab allows you to set the audio tracks that get recorded into clips stored on the server and the
Audio Output Router tab allows you to set which audio is played from clips stored on the server.
1. Launch the
Tria Config
application.
You may be prompted to allow the program to make changes on the computer, click Yes .
2. Click the Audio Router tab.
Tip: If the audio routing on an input or output has been changed, a dot is shown next to the name on the tab.
12 • Server Configuration — Tria News User Manual