Ross Abekas Mira, Руководство пользователя

Страница: 50 / 73

3. In the Audio Tracks area, select the number of
audio tracks to record.
• 2 track audio
— record two tracks of audio.
• 4 track audio
— record four tracks of audio
• 8 track audio — record eight tracks of audio.
This option is not available when the server is
operating in an SD video format(525/480i or
625/576i).
• 16 track audio — (software option) record
sixteen tracks of audio. This option is not
available when the server is operating in an SD
video format(525/480i or 625/576i).
4. In the Audio Tracks in an ISO Clip area, select
the number of audio tracks to record per input
channel when recording in ISO mode.
5. In the Audio Muting Policy area, select how the
audio output (AES, embedded, and analog audio
out) is muted during playback.
• Mute everything except 100% play speed
and JOG STEP
— audio is muted at all play
speeds except 1× (100%) and during single-frame
jogging.
• Mute everything except 100% play speed.
Mute JOG STEP
— audio is muted at all play
speeds except 1× (100%).
• Mute when speed is not in the range 85%
through 115% of play speed
— audio is
muted at all play speeds except in the range of
85% to 115% play speed.
• Mute when playback speed exceeds 200%
play speed.
— audio is muted only when play
speed exceeds 2× (200%).
6.
In the Analog Audio Monitor area, select the
channel transport audio that you want to monitor on
the analog audio output headphone jack. Only audio
tracks 1 and 2 are available on the analog audio
output port.
7.
Click Apply .
Audio Router Setup
There are two integrated audio routers built into the
server. An input router that sends audio from an audio
input to any channel transport, and an output router that
sends the audio from a channel transport to any audio
output. The number of audio inputs and outputs depends
on the options you have installed in your server. Audio
sources and destinations include embedded audio and
dedicated AES ports on the optional Digital Audio
Breakout Panel.
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
64
Digital
Audio
Breakout
Panel
64
Digital
Audio
Breakout
Panel
8
8
8
8
8
8
8
8
Emb
e
dded
A
udio
Emb
e
dded
A
udio
ChA
ChB
ChC
ChD
ChE
ChF
ChG
ChH
ChA
ChB
ChC
ChD
ChE
ChF
ChG
ChH
Server
Input
Router
Output
Router
Figure 3: Audio Track Flow (8-channel shown)
To Configure the Audio Router
When recording or playing you can route audio tracks
from one track in the source to another, or multiple audio
tracks in the destination.
1. Launch the Mira Config application.
You may be prompted to allow the program to make
changes on the computer, click
Yes .
2. Click the Audio Router tab.
Tip: If the audio routing on an input or output has been
changed, a green dot is shown next to the name on the tab.
3.
Click the Audio Input Router tab.
50 • Server Configuration — Mira Manual (v6.1)