•
0.10 MIX
— a 10-frame dissolve is performed
between clips.
•
0.15 MIX
— a 15-frame dissolve is performed
between clips.
•
0.20 MIX
— a 20-frame dissolve is performed
between clips.
•
1.00 MIX
— a 1-second dissolve is performed
between clips.
8.
Click
Save
to save the changes to the playlist.
Tip:
Click Save and AIR List to save the changes to the
Play List and load the Play List into the selected channel
transport.
To Air a Play List
Take the Play List on-air to play each clip in order with
the set transitions and clip speeds.
Note:
If you want to use mix transitions between the clips in the
Play List you must use two channel transports. Depending on
the channel transport you select, the following channel transport
becomes unusable.
1.
Double-click on the playlist you want to air in the
Clip Library.
2.
Select the channel transport that you want to play
the Play List on.
Tip:
Select ChA, ChC, ChE, or ChG if you want to use a
mix transition.
3.
Click
AIR List
on the
Playlist Editor
window.
The
Playlist Editor
window changes to the
PLAYLIST ON-AIR
window, and the first clip in
the Play List is highlight red and is loaded into the
selected channel transport.
4.
If you want to dissolve (mix) from one clip to the
next in the Play List select
ChB > ChA
,
ChD >
ChC
,
ChF > ChE
, or
ChG > ChH
. If not selected
the Play List will cut from one clip to the next.
You are prompted whether you want to load the list
in PGM/PVW mode. Click
Yes
. The next clip in
the Play List (highlighted green) is loaded into the
second channel transport.
5.
Click play (
) to start playing the Play List.
Tip:
Click the loop button (
) to have the Play List start
again at the beginning when it finishes the last clip. It is
recommended that you set @START to PLAY and @END
to TAKE to fully automate the loop.
The first clip starts to play out and executing the @Start,
@End, and transition tags of the current clip. When the
clip is close to the end (3 seconds) the next clip highlights
yellow, indicating that the PVW channel is about to go
on-air as part of the transition.
Tip:
When you are finished using the playlist feature, click EXIT
to take the playlist off-air and free up the channel transports for
other uses.
Play List Commands
As a Play List is playing out you can skip items in the
Play List, cue up segments with manual or immediate
playout, or re-cue to the start of the Play List. When you
jump to a new location in the Play List, the server
continues to play the clips in the Play List from the new
location.
To access the list of commands, right-click on the clip
you want to cue or play.
•
Play this segment next
— play the selected clip
after the currently playing clip finishes on the PGM
channel. The clip is highlighted green and is played
next.
•
Cue this segment next
— cue the selected clip
after the currently playing clip finishes on the PGM
channel. The clip is highlighted green and is cued
next. The clip pauses at the first frame and must be
played manually.
•
Play this segment immediately
— immediately
load and play the selected clip on the PGM channel.
•
Cue this segment immediately
— immediately
load and cue the selected clip on the PGM channel.
The clip pauses at the first frame and must be played
manually.
•
Cue to start of playlist immediately
—
immediately load and cue the first clip in the Play
List on the PGM channel. The clip pauses at the first
frame and must be played manually.
Tip:
You can quickly take a different clip in the list by selecting
the new clip and clicking the TAKE button.
Mira Manual (v6.1) — Clip Library •
35
Содержание Abekas Mira
Страница 1: ...Mira Manual v6 1 ...
