Panic Setup
AirCleaner
®
canViolations be set up to either defocus
any violation content or replace it will the aux in feed.
This applied to both audio and video violations.
To Configure Video Panic Setting
The video panic settings tell the system how to react
when the video panic button is pressed.
1.
Use the
SELECT
knob to select
On Video
Trigger
.
2.
Use the
SET
knob to select how the system reacts
to a video panic button trigger.
•
Defocus
— visual violation is covered by
defocusing the live image. The amount of
defocus is determined by the Defocus Level
parameter.
•
Luma Matte
— visual violation is covered by
switching to a flat-screen luminance matte image.
The luminance value of matte image is
determined by the Luma Matte Level parameter.
•
AUX IN
— visual violation is covered by
switching to the AUX IN video.
3.
(Defocus Only) Use the
SELECT
knob to select
Defocus Level
.
a)
Use the
SET
knob to select the amount of
defocus you want to apply to cover a video
violation. (0 to 100)
Tip:
To help determine the amount of defocus you
need, feed sample video through the system and press
the video panic button. While holding the video panic
button you can adjust the amount of defocus.
4.
(Defocus Only) Use the
SELECT
knob to select
Defocus Ramp
.
a)
Use the
SET
knob to select the amount of time
to fade the defocus effect in. (0 to max)
Note:
The defocus ramp is applied along with the
reaction time. This means, for example, that the
defocus fade could start the value of the ramp time
(1:00) before the value of the reaction time offset
(2:00) is applied, resulting in the defocus fade starting
the cumulative time (3:00) before the trigger point.
5.
(Luma Matte Only) Use the
SELECT
knob to select
Luma Matte Level
.
a)
Use the
SET
knob to select the amount of luma
matte to apply. (0 to 100)
Tip:
To help determine the amount of luma matte you
need, feed sample video through the system and press
the video panic button. While holding the video panic
button you can adjust the amount of luma matte.
To Configure Audio Panic Setting
The audio panic settings tell the system how to react
when the audio panic button is pressed.
1.
Use the
SELECT
knob to select
On Audio
Trigger
.
2.
Use the
SET
knob to select how the system reacts
to an audio panic button trigger.
•
Mute
— aural violation is masked by muting
the audio.
•
Audio AUX IN
— aural violation is masked by
switching to the Audio AUX IN audio signal.
18
• Panic Setup — Abekas AirCleaner User Manual (v3.5)
Содержание Abekas AirCleaner ACL-A
Страница 1: ...Abekas AirCleaner User Manual v3 5...