ROSIERES LVI 980 A Скачать руководство пользователя страница 21

Страница: 21 / 61

Operating the programmes
and special functions

Use in conjunction with programme guide

Setting a programme

Open the door press the button; the last
programme selected will appear on the display.
To set a new programme, press the Programme
Selection Button "P". When the required
programme is shown in the display, press the

button. The time of the selected programme

(in hours and minutes) will start to flash in the
display.
Close the door and after an audible signal has
sounded (if it has not been deactivated) the
programme will start automatically.

HALF & HALF Button
To ensure that your dishwasher meets all your
requirements, the “HALF & HALF” option button
allows you to select:

Half Load Top Basket
By selecting this option Dishes are
washed in the top basket and cutlery in
lower basket

Half Load Lower Basket
By selecting this option Dishes are
washed in the lower basket only.

Simultaneous Washing
By  Selecting  this  option  Dishes  are
washed in the top and lower basket.
This  option  reduces  washing  times  in
relation to full programme.
(Please  note  that  selecting  the  (c)
option no other option button can be

selected, except for ,

and

buttons.

HP button

Your dishwasher is fitted with a two speed
motor. By pressing the

Button, the motor

operates at a higher speed which will result in
higher water pressure, to attack the dirt.

The

option is particularly suitable for

washing pans, pots and heavily soiled crockery.

Please Note:
This option must be selected before
pressing the button.

Economy button

The  "E"  button  reduces  the  temperature  of  the
water during the last rinse, provides an energy
saving  of  more  than  20%  and  shortens  the
cycle.
Recommended  for  evening  washes  when  the
dishes  are  not  required  perfectly  dry, straight
away.

Interrupting a programme
It is not recommended that the door be opened
while  a  programme  is  running,  and  especially
not  during  the  main  wash  phase  and  final
drying.
However,  the  appliance  will  stop  automatically
when the door is opened.
At  this  point  the  various  wash  options  can  be
programmed or cancelled. The current program-
me can also be cancelled.
If, the door is opened during a programme, the
symbol  for  that  programme  will  flash  in  the
display and the machine stops.

Please Note:
If you open the door during the drying cycle
an audible audio signal advises you that the
drying cycle has not yet completed.

To restart the machine, press the

button

and the time remaining for the programme will
flash. Now close the door.
If you wish to cancel or change a programme
that is running, carry out the following:

open the door keep the button pressed
in until the number of the programme stops
flashing. A new programme can now be set.

NB: If,  on  pressing  the              but t on  t he  symbol
"00" starts to flash on the display, it means that
there is water in the machine.
Close  the  door  to  allow  the  water  to  be
discharged and wait for the audible signal, after
which the new programme can be set.
Before  starting  a  new  programme,  you  should
check that there is still detergent in the dispenser.
If necessary, top up the dispenser.

End of programme
The  end  of  the  programme  is  indicated  by  an
audible  signal  (if  it  has  not  been  deactivated).
When  the  door  is  opened  the  number  of  the
programme  that  has  just  finished  will  appear  on
the display.

Important:
If the programme shown in the display starts
to flash and the machine will not let any more
programmes be selected, press the button

and keep this button pressed until the display
stops flashing.

Delay Start programme button

To set the delay start programme press the

button.

On the first press the current setting appears on
the display. Each time the button is pressed the
delayed time in one hour increments increases,
up to a maximum of 19 hours.
Once set, wait until the selected time is confirmed
when it appears in the display. Press the

button to start the countdown. If the countdown
has not already been activated, the delay start
can be cancelled by pressing the button

until  the  selected  programme  appears  on  the
display.
The  delay  start  can  be  cancelled  at  any  time
simply  by  keeping  the

button pressed in

until  the  required  wash  cycle  appears  on  the
display.
If  you  wish  to  see  which  programme  has  been
selected,  press  the  "Programme  Selection"
button (P).

NB: If the door is opened during the countdown,
for example to select one of the options (or to
add more dishes), the

button should be

pressed before closing the door again, in order
to restart the countdown.

Activating  and  deactivating  the  audible
signal
The  audible  signal  function  can  be  deactivated
in the following way:
keep  the  Programme  Selection  Button (P)
pressed  in  for  a  few  seconds  and  at  the  same
time press the stop/start button ; if the

symbol "b1" appears on the display the audible
signal is activated. Press the programme
selection button (P) again and the symbol "b0"
will appear which means that the audible signal
has been deactivated.
An audible signal sounds to indicate that the
setting has been stored in memory.

Attention

This

dishwasher

equipped

with

anti-overflow  safety  device which  works  even
when  power  is  off,  and  if  the  water  level  is  too
high, the supply will automatically be closed off.
Important
To  ensure  the  correct  operation  of  the
anti-overflow  safety  device,  it  is  recommended
not  to  move  or  to  tilt  the  dishwasher  during
operation.
If  it  is  necessary  to  move  or  to  tilt  the
dishwasher, first make sure the washing cycle is
finished and that no water is left in the tank.

Display shows E1.

Display shows E2.

Display shows E3.

Display shows E4.

Display shows E5.

PROBLEM

CAUSE

REMEDY

The Dishwasher is able to self-assess a number of problems. The problem will
be illustrated in the display window and by an audible signal.

Water supply switched off.

Problem with electronic temperature
control.

The Water Heater Element does not
work properly or the filter mesh is
blocked.