T600N - Wireless Dual Band Gigabit Router
98
Problem. My DSL connection is working, but I can not access the internet with T600N.
•
Solutions.
Your Internet Service Provider (ISP) may require the entering of Login and password. To enter, please
click
PPPoE
under
Internet.
Then enter the connection information provided by your ISP.
Problem. The Setup Wizard does not detect or configure my network.
•
Solutions.
1. Reset your modem, and power off your T600N by unplug the power adapter then plug back in.
2. Allow the wizard to detect your Internet connection one more time. Then follow the Wizard’s instruction to complete.
3. Or you can check with your ISP for the following connection methods under
Internet
:
•
DSL Connection (Mostly as PPPoE Connection):
Your internet connection needs login information. Please check with ISP if
you do not have on hand.
•
Cable Modem Connection (Mostly as Dynamic IP or Static IP Connection):
Cable modem connection may require you to
clone MAC address.
•
Click
Dynamic IP
under
Internet
, then under
MAC Address
select
Clone MAC
or manually enter the MAC address.
•
Click
Static IP
under
Internet
,
then enter the
IP address
and other connecting information from the ISP.
Problem. My IP address show up as 169.254.x.x and my computer tells me that I have “Limited or no Connectivity”
•
Solutions.
Check if T600N’s
LAN
under
System
and see if you enable the
DHCP Server
, also check if your computer is set as DHCP setting.
(DHCP should look like below). Restart you computer and try again. If same thing occur, please try using another computer or the wireless
connection.
Problem. I am not getting maximum signal strength when right next to my router.
•
Solutions.
The client may be too close to the router. You may want to step 5 ~ 10 feet away from the router. You can also change the
wireless channel to avoid wireless interference. Recommended channels use are 1, 6, and 11.
TROUBLESHOOTING
Содержание Trident-T600N
Страница 1: ...T600N Wireless Dual Band Gigabit Router 1...