T600N - Wireless Dual Band Gigabit Router
42
CONFIGURATION GUIDE
Wireless 2.4G – Basic – 2
– WDS
WDS:
Allows the wireless network to be expanded using multiple access points
without wired connections.
•
Radio:
Enable or disable the wireless radio. If the wireless radio is disabled,
there will not be any wireless signal.
•
Mode:
•
WDS:
Allows the wireless network to be expanded using multiple
access points without wired connections.
•
Channel
Select a channel to assign to the wireless network. Valid
value are from one to eleven in the US and one to thirteen in the EU.
•
MAC Address [#]
Enter the MAC address (es) for the wireless access
point(s) that you want to connect to here. (you will also need to enter
T600N’s MAC address into the wireless access point(s) you want to
connect with)
•
WDS Data
Rate Select the data rate for the WDS.
•
Set Security
Click Set Security to display the WDS security settings
screen. For security configuration settings, refer to “WDS Security
Settings Screen” on next page.
Note:
In order for WDS to work, there are some basic requirements:
1. Both AP need to be able support WDS function.
2. Both AP need to have same SSID, and same Channel.
3. When set to WDS, both AP’s MAC addresses will be needed.
4. Both AP’s WDS encryption and password has to be the same.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Содержание Trident-T600N
Страница 1: ...T600N Wireless Dual Band Gigabit Router 1...