T600N - Wireless Dual Band Gigabit Router
28
Setup Wizard
1. After click twice on “
Next
” confirming to start on the Wizard setup
process, T600N will automatically detect your Connection from the
ISP. You will need to provide T600N the following information once
the connecting method was detected.
2. T600N is able to detect Static IP, Dynamic IP, PPP over Ethernet, PPTP,
and L2TP connection methods.
•
PPPoE:
PPPoE requires you having the
User Name
and
Password
provided by your ISP. Normally happens when using
DSL connection.
•
Dynamic IP (DHCP):
DHCP does not require entering anything.
Usually happens when getting connection from an existing
internet Connection.
•
Static IP (Fixed):
Fixed requires you entering a set IP address,
Subnet Mask, Gateway IP Address, Primary DNS, and/or
Secondary DNS. These information will provided by your ISP
and normally happens when using Cable connection.
•
Manually Configuration
: If no WAN Connection was detected,
you will need to manually enter the necessary information to
connect to your ISP. You may want to check the cable
connection and
Rescan
.
Wizard – Modem to LAN Setup
CONFIGURATION GUIDE
Содержание Trident-T600N
Страница 1: ...T600N Wireless Dual Band Gigabit Router 1...