Remote Control Keystick Manual
10
Programming Errors:
If the RCK-Keystick encounters programming errors, the red and green layer indicators will blink
simultaneously on and off. Turn the programming switch off and back on to reset the RCK-Keystick to
programming mode.
Errors can occur if:
a) There is an unreliable cable connection, check all cords for proper connection.
b) The computer is not operating in a mode to accept the entered commands (for example, pressing <Ctrl>,
<Alt> and <Delete> may cause a PC to reboot and the RCK-Keystick will not boot-up in programming mode).
c) Memory in the RCK-Keystick is exceeded. The entire RCK-Keystick will memorize 800 to 1,000 keystrokes
depending on the device and the keystrokes. If you think you have exceeded the memory capacity, contact our
tech support department for tips to conserve memory on the RCK-Keystick.
