Remote Control Keystick Manual
7
Special Programming Features:
All special programming features on the RCK-Keystick are accessed using the same steps:
1. Slide the programming switch to put the RCK-Keystick into programming mode (the layer indicator will
blink).
2. Tap the key that you want to program (the layer indicator will double-blink).
3. Press and hold the Esc key.
4. Press and release the associated command key (see table and instructions below).
5. Release the Esc key
6. Confirm programming on the key (the layer indicator will blink).
7. Slide the programming switch back to the operating position (the layer indicator will glow steadily).
Once you become familiar with the special programming features on the following pages, this list of key
commands serves as a useful reference.
Command Symbol Legend
Indicates when to press and hold a key down
Indicates when to tap a key
Indicates when to release a key
Chevrons indicate the key to be pressed
