manualshive.com logo in svg

Rose electronics RA180, Руководство пользователя

Поделиться
Скачать
Rose electronics RA180 Скачать руководство пользователя страница 31

- 60 -

- 61 -

Warranty

Model Name

RA180

Purchase Date

DD           /           MM           /           20YY

Place of Purchase

Shop Name

Contact Address

Serial No.

Contact Address

Warranty Period

Until 1 year from the date of purchase

•  Name of the Company that Received the Conformity Assessment: CI TECH Co., Ltd.

•  Manufacturer/Country of Manufacture: CI TECH Co., Ltd. / Republic of Korea

•  Identification Code of the Certified Company: SYH

•  Certification No.: R-R-SYH-RA180

Check Before Contacting the Service Center

•  If the switch does not work while the product is in use, it may be because it was exposed to severe static electricity. Please disconnect the power 

cord before starting again.

•  When the product is used for a long time in a confined space that does not meet the product installation conditions (page 22), it may generate 

heat and become hot, affecting the life and performance of the product. 

Always keep the ventilation openings on the top of the main body open so that heat dissipation inside is not disturbed.

•  If the transmission is unstable or a transmission or reception failure occurs due to the nature of wireless Wi-Fi communication when using the 

mobile app, please move to another location and try to reconnect.

•  If the main body does not turn on, the power cord may be unplugged. Please check the power plug.
•  If there is no output sound, check the input source selector and output selector of the main unit, and check that the speaker connection status, 

the mute switch, and the volume control level are not “0.”

•  If the remote control does not work, the battery may be empty. Replace it with a new battery.

Product Website: www.hifirose.com

•  Get news about the latest events and new product information from ROSE through the newsletter.
•  You can find an authorized dealer or reseller near you on the website.

* HiFi ROSE is a registered trademark.

Содержание RA180


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды