Rose electronics RA180, Руководство пользователя

Страница: 21 / 33

- 40 - - 41 -
4-2. How to Register a Device
This is the first screen to register the
network of the amplifier. Please select
“Next.”
If you press and release the power button of the amplifier to
be connected for 5 seconds, the backlight blinks and it goes
into the connection standby state, and the amplifier to be
connected is displayed as ROSEAMP_XXXXXX on the Wi-Fi list.
Select the amplifier that appears and select “Back” when the
amplifier list is displayed as connected in the Wi-Fi list.
4-2-1. 4-2-2. 4-2-3.
Next is the screen to connect the network of the
amplifier. Please connect the Wi-Fi to be used.
※ The network of the amplifier does not support dual bands.
Therefore, when connecting to a network with a frequency of
5 ㎓, the network of the amplifier is not connected.
4-2-4.
This is the screen to check the network
connection status of the amplifier.
• Check the Wi-Fi credentials of the amplifier.
• Check the Wi-Fi connection of the amplifier.
• Check the network status of the amplifier.
4-2-5.
Check that the device and the amplifier are
on the same network.
4-2-6.
This screen lists the amplifiers connected to the
same Wi-Fi, and it is the screen that appears when
you select B (Device Search) on the first screen.
For a detailed explanation, please refer to the
following description. (4-3)