Rose electronics RA180 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 33

Rose electronics RA180 Скачать руководство пользователя страница 24

- 46 -

- 47 -

5-1. How to Use Bypass·Power Amplifier Mode

When the Bypass·Power Amplifier Mode switch on the front is turned on, the input source of Line 3 is connected to the power amplifier without

going through the preamplifier.

Caution:

At this time, if the signal from the input source is large, it may damage the speaker connected to the product.

※

To use this function, the source device must be connected to Line 3.

5. Bypass

·

Power Amplifier Mode

Caution

If the input level is high when switching to Bypass·Power Amplifier

Mode, it may damage the speaker, so please pay attention to the

warnings. The company is not responsible for any damage caused by

negligence.

Please activate this function in the mobile app before use, and then switch

the Bypass·Power Amplifier Mode switch on the main unit from OFF to ON.

Warning!

• To use the power amp mode by turning on Bypass·Power Amplifier Mode, activate the function in the following order.

5-1-1.

5-1-2.

5-1-3.

In the mobile app, select “Unlock” from the

bypass menu in the amplifier settings.

After fully checking the the warning pop-

up, select “OK.”

Lastly, change the Bypass·Power Amplifier

Mode switch on the main body to ON to

activate this function.

Caution

If the input level is high when switching

to Bypass·Power Amplifier Mode, it

may damage the speaker, so please pay

attention to the warnings. The company

is not responsible for any damage

caused by negligence.

Please activate this function in the mobile

app before use, and then switch the

Bypass·Power Amplifier Mode switch on

the main unit from OFF to ON.

FRONT

«
...
22
23
24
25
26
...
»

Содержание RA180


































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды