Rose electronics RA180, Руководство пользователя

Страница: 20 / 33

- 38 - - 39 -
3-9. How to Connect Connectors and Cables
3-9-1. Trigger Input Terminal and Pinout
3-9-2. External IR Input Terminal and Pinout
• The trigger function can control the power by linking the product and the source device.
• If you are using a source device with a trigger output terminal, you can use the trigger function by connecting it to the trigger input port of this
product with a monaural mini terminal cable.
• This is used when the product is installed on a table or shelf that is not visible from the outside, or when it is located in a place where
communication with the internal IR is impossible.
• The IR external receiver uses a 3.5 ㎜ stereo mini phone plug. Refer to the following figure for the pinout.
※ When the external IR terminal is connected, the internal IR receiver of this device does not operate.
Available power supply : DC3.3V ~ DC12V
RA180
Power Button Signal Grounding
RA180
VCC GND DATA
4. Mobile Wi-Fi Settings
4-1. Main Home Screen
A
B
• This is the screen that appears when you run AMP Connect for the first time. You can connect the amplifier to the network by selecting A.
You can also select B to search for amplifiers with network connections.
• The connection sequence is as follows.
1. Search for the amplifier in the Wi-Fi settings of the mobile phone (tablet) and connect the amplifier.
2. Connect the amplifier connected in the above step to the network (Wi-Fi).
3. After connecting the amplifier to Wi-Fi, check that the mobile phone (tablet)
and amplifier are connected to the same network (Wi-Fi).
Caution: If the amplifier and the mobile phone (tablet) are not connected to the same network,
the amplifier will not be searched.