manualshive.com logo in svg

Rose electronics RA180, Руководство пользователя

Поделиться
Скачать
Rose electronics RA180 Скачать руководство пользователя страница 22

- 42 -

- 43 -

4-3. Device Search

This is the screen for connecting by directly 

inputting the IP address of the amplifier 

connected to the Wi-Fi network.

4-3-1.

When you click the amp search function, 

the LED of the amplifier blinks for 10 seconds. 

This shows the settings of the amplifier.

(4-3-3. See further explanation.)

You can turn the amplifier power on/off. 

You can select the output source of the amplifier.

(4-3-8. See further explanation.)

This shows the detailed description value of the 

current amplifier.

(4-3-9. See further explanation.)

You can adjust the amplifier volume.

4-3-2. Device Connection Screen and Function Description

This shows the IP address of the current amplifier.

(4-3-5. See further explanation.)

This shows the firmware version of the current 

amplifier. (4-3-4. See further explanation.)

This shows the current amp volume motor speed. 

You can adjust the speed.

This shows the current Wi-Fi mode. You can set the 

mode. (4-3-6. See further explanation.)

You can set the time for the amplifier to 

automatically shut down after the set time has 

elapsed when there is no input signal to this 

product. (4-3-7. See further explanation.)

This shows the version information of the current 

amplifier. When there is an update, the update 

button is activated. If you select the activated 

update button, the update begins.

This shows the current bypass mode. You can set 

the mode. (5-1. See further explanation.)

4-3-3. Amplifier Settings

4-3-4. Detailed Firmware Version Information

If you select FW Details, the firmware 

details of the amplifier are displayed.

Содержание RA180


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды