Roscoe Medical Twin Stim Plus 3rd Edition, Инструкция по эксплуатации

Страница: 31 / 40

TENSPros
30
[▲] or [▼] button to adjust the parameter from 1s to 8s.
9.2.3 Set ON time (A or S program)
Press [ SET
] button again, The “On” indicator displays on LCD, press [▲]
or [▼] button to adjust the parameter from 2s to 90s.
9.2.4 Set OFF time (A or S program)
Press [ SET
] button again, The “Off” indicator displays on LCD, press [▲]
or [▼] button to adjust the parameter from 2s to 90s.
9.2.5 Set pulse width
Press [ SET ] button again, the “Width” indicator displays on LCD, press
[▲] or [▼] button to adjust the parameter from 50μs to 300μs.
9.2.6 Set pulse rate
Press [ SET ] button again, The “Rate” indicator displays on LCD, press
[▲] or [▼] button to adjust the parameter from 2Hz to 150Hz.
9.2.7 Set timer
There are two adjustable timers available. The left timer controlling the
treatment time of CH1 and CH2. The right timer controlling the treatment
time of CH3 and CH4. The treatment time is adjustable from 1 to 60
minutes or C (Continuous). Press [
SET ] button to enter this menu, then
press [▲] or [▼] button to adjust the setting. Press [▲] button when the
timer shows 60 minutes, it will be switched to continuous stimulation.
Two timers can be set in the same way.
9.3 Steps to set a new IF program
9.3.1 Select IF therapeutic mode and program
Press [ MODE ] button until the LCD display “IF” and expected program
(N, M, M1).
9.3.2 Set interference frequency
Press [ SET
] button to enter setting mode, press [▲] or [▼] button to adjust
the parameter from 1Hz to 150Hz.
9.3.3 Set timer
There are two adjustable timers available. The left timer controlling the
treatment time of CH1 and CH2. The right timer controlling the treatment
time of CH3 and CH4. The treatment time is adjustable from 1 to 60 minutes