20
9
Q U I C K S T A R T G U I D E
This Quick Start Guide is designed to give you a brief outline of
the Roscoby Riser Cam and its features. Please take the time to
read the entire Users Manual to fully understand the camera and
its functions prior to its use in the field.
Opening / Closing the Main Housing:
It takes 2 complete rev-
olutions to remove or install the End Cap from the Main Housing.
Use care when twisting on the cap to insure proper installation
and avoid accidental cross threading.
Battery Removal / Installation:
With the End Cap removed,
push down on the Battery Compartment Door and rotate up to
expose the Battery Magazine. Tip the camera slightly and the
Magazine will slide out. Properly install 2-AA Energizer e2
Lithium batteries into the Battery Magazine and slide it back
into the compartment. Rotate the door down, over the Catch
mechanism and push up until it is locked into position.
2 Battery Magazines (one spare) are included with the Roscoby.
SD Card Installation:
With the Roscoby powered “OFF” and
the End Cap removed, push the Battery Compartment Door down
to expose the SD Card Slot. Carefully and properly insert the SD
card and press until it “clicks” into the locked position. Push the
Battery Compartment Door up until it is locked into position.
SD Card Removal:
With the Roscoby powered “OFF” and the
End Cap removed, push the Battery Compartment Door down to
expose the SD Card Slot. Gently push on the back of the card
until it is released from the card holder and carefully remove the
card. Push the Battery Compartment Door up until it is locked
into position.
Your PC has now been updated to play the MPG4 video files
created by your Roscoby Riser Cam. Congratulations!
If you have encountered difficulty installing the XviD codec,
please go to the FAQ section of our web site: www.roscoby.com.
There you will find even greater detail and explanation.
Installing the codec from the web site to a PC:
This method
of installing the XviD codec should be performed without the
camera connected to the PC.
1. On your PC, connect to the Internet and go to www.roscoby.com
2. Click on “XviD Codec for your Media Player.”
3. Click on “XviD.exe file.”
4. Click on “Save File” button and save the file to your Desktop.
5. From your Desktop, Double Click on the “XviD Icon.”
(In Windows Vista, click “Allow Access to the Program”)
6. The “Set up Wizard” will appear, click “Next.”
7. Read & Accept the License Agreement, click “Next.”
8. Read XviD information and click “Next.”
RiserCam, LLC. recommends that you allow XviD to select
the default locations, names and Decoding Options to complete
this installation.
9. Allow the default “Destination Location.” Click “Next.”
10. Allow the default “Menu Folder” destination. Click “Next.”
11. Allow the default “Decoding Options.” Click “Next.”
12. At “Ready to Install,” click “Install.”
13. Click on “Finish” to complete and close the XviD Setup Wizard.
Follow the directions above for proper connection to your PC
or transfer of files to your PC. You may now view video clips
