Roscoby Riser Cam, Руководство пользователя

Страница: 13 / 26

16 13
Memory Indicators / Warnings:
The Roscoby Riser Cam
provides visible alerts to the user to insure proper operation and
timely replacement of SD cards as they reach full capacity. The
Red LED light is the indicator for recording. When the Red LED
is lit, the unit is “Recording.” When the camera detects 30 minutes
of record time remaining, the LED will blink once every 10 seconds.
When the camera detects 15 minutes of record time remaining,
the LED will blink once every 5 seconds. When the camera detects
5 minutes of record time remaining, the LED will blink once
every 2 seconds. These indicators are the same for all capacities
of SD cards.
Please visit the FAQ section of our web site for more
detailed information about the SD cards and their function.
Mounting Roscoby to your bow:
Before attaching the camera
to your bow, be sure to have a fresh SD card and batteries installed.
Make sure the End Cap is properly attached to the Main Camera
Housing.
Begin by tightening the Jam Nut into the Rubber Isolator. This
compresses the Isolator and allows the user the opportunity to
The proper orientation of the SD card is with the contacts facing up.
We recommend the use of SanDisk brand SD cards in the Roscoby
Riser Cam to insure consistent results.
Insert card
Red LED
• Visit the FAQ section of our web site for information regarding
the formatting of SD cards on your PC.
• If power is interrupted prior to completing the record cycle,
the video footage may be lost.
• You can only delete files from the SD card when connected
to a PC or if the SD card is plugged directly into the PC.
A D D I T I O N A L B A T T E R Y I N F O R MA T I O N
• Always install fresh batteries prior to going into the field.
• Do not mix old and new batteries together.
• Do not mix battery brands or types.
• Remove the batteries if the camera is not going to be used
for long periods of time.
• Exhausted, damaged or leaky batteries should never be left
in the camera.
• Properly install the batteries into the Battery Magazine or
damage to the electronics will occur.