Rosco Laboratories X-Effects, Инструкция по эксплуатации

Страница: 17 / 23

Manual Mode
By turning DIP switch #3 ON, the module is placed into manual mode. This will
automatically turn the lamp on and open the dowser (if present). This mode also allows
manual control of the dual wheel accessory. The speed of the two wheels can be adjusted
by turning the two shafts near the top of the module (full CW is fastest speed, full CCW
is stop). The direction of the two wheels can be adjusted by changing the position of DIP
switches #1 and #2. Additionally, the brightness of the lamp can be adjusted by the shaft
near the bottom of the module with a small flat screwdriver (full CCW is 200W, full CW
is 160W).
Note that the DMX OK indicator will light if DMX is connected to the unit, even if the
unit is not in DMX Mode.