Rosco Laboratories X-Effects, Инструкция по эксплуатации

Страница: 11 / 23

10
Installing the Lamp (Base Unit)
1. Unplug the unit.
2. Open the hinged lid on the top of the base unit.
3. Pull the lamp clip back away from the lamp gasket. Insert the
lamp so that the front of the reflector is seated in the lamp
gasket. The wire exiting from the front of the reflector should
be positioned in the cutout of the gasket. Release the lamp
spring clip to lock the rear of the lamp in place.
4. Attach the connector from the lamp to the connector in the unit.
It is a polarized connector and will only connect in one
position.
Wire
Cutout
Lamp Clip