Ropex Resistron RES-5011 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 76

Ropex Resistron RES-5011 Скачать руководство пользователя страница 3

Revision list

Version 2

RES-5011

Page 3

1

Revision list

2

General information

This RESISTRON

®

temperature controller is manufactured according to EN 61010-1. In the course of its manu-

facture it passed through quality assurance, whereby it was subjected to extensive inspections and tests. As a
result of this, the product left our factory in perfect condition.
Please carefully read through the operating manual before using the RESISTRON

®

temperature controller. Keep

the operating manual for later reference and make sure that information and functions important for the user are
available.
The recommendations and warning notes contained in these operating instructions must be complied with, in
order to guarantee safe operation.
The device can be operated within the limits indicated in the "Technical Data" without impairing its operational
safety. Installation and maintenance may only be performed by technically trained, skilled persons who are familiar
with the associated risks and warranty provisions.

2.1

Copyright

All contents, in particular texts, photographs and graphics, are protected by copyright. All rights, including to rep-
lication, publication, editing and translation, are reserved.

2.2

Intended use

RESISTRON

®

temperature controllers may only be used for heating and temperature control of heatsealing bands

which are expressly approved for them, and providing the regulations, notes and warnings contained in these
instructions are observed.

Version

Change

1

• Creation of documentation

2

• Change to one column layout

• ROPEX logo changed

• Covering page with important features

• Additions in general information



section 2 "General information" on page 3

• Addition in Communication protocol: Status bit measurement interruption



section 8.6.10 "Measurement interruption (MU)" on page 28

• Terminal number of analog output corrected



section 8.7.8 "Automatic phase angle compensation (AUTOCOMP)" on page 50

• Extension of parameter object with instances 54 to 70: absolute calibration resistances



• Extension integrated webserver: presentation of calibration values



section 8.8.6 "Calibration page" on page 58

• Updating of how to order



section 13 "How to order" on page 73

«
1
2
3
4
5
...
»

Содержание Resistron RES-5011













































































Отзывы:

Нет отзывов