General information
Version 2
UPT-6010
Seite 5
Compliance with these standards and provisions is only guaranteed if original accessories and / or peripheral
components approved by ROPEX are used. If not, then the equipment is operated on the user's own responsibility.
The CE marking on the controller confirms that the device itself complies with the above-mentioned standards.
It does not imply, however, that the overall system also fulfills these standards.
It is the responsibility of the machine manufacturer and of the user to verify the completely installed, wired and
operationally ready system in the machine with regard to its conformity with the safety provisions and the EMC
directive (see also section "Power supply"). If peripheral components (e.g. the transformer or the line filter) from
other manufacturers are used, no functional guarantee can be provided by ROPEX.
2.8
Maintenance
The controller requires no special maintenance. Regular inspection and / or tightening of the terminals – including
the terminals for the winding connections on the impulse transformer – is recommended. Dust deposits on the con-
troller can be removed with dry compressed air.
Dust deposits and dirt from liquids result in a loss of function. Accordingly, installation in a switch
cabinet or terminal cabined with IP54 is recommended.
2.9
Transportation
Store and transport the device in its original carton.
After transport, perform a visual inspection for possible damage.
2.10
Disposal
This device is subject to Directive 2012/19/EU concerning the reduction of the increasing amount of
waste electrical and electronic equipment and the disposal of such waste in an environmentally
sound way.
To guarantee proper disposal and / or the recover of reusable material, please take the device to a
designated municipal collection point and observe local regulations.
Careless, uncontrolled disposal can cause damage to the environment and human health. By
ensuring that your product is disposed of or recycled in a responsible way, you can help protect the
environment and human health.
EN 55011:2009+A1:2010
EN 61000-3-2:2006-04+A1:2009+A2:2009
EN 61000-3-3:2008
EN 61000-6-4:2007+A1:2011
(2014/30/EU)
EMC generic emissions:
Group 1, Class A
EN 61000-6-2:2005 (2014/30/EU)
EMC generic immunity:
Class A (ESD, RFI, burst, surge)
Exception:
Line voltage interruption acc. to EN 61000-4-11 is not
fulfilled (this leads to a designated error message of the
controller)
2011/65/EU
Directive on the restriction of the use of certain haz-
ardous substances in electrical and electronic equip-
ment.
!
