ABOUT THIS MANUAL
Manual Brake Installation, Operation, and Maintenance Manual
Page ii
This manual contains information on the Roper Whitney Company line floor-
mounted manual bending brakes for 16- to 18-gauge material.
The contents include a machine description, safety precautions, instructions for
installation, adjustment, operation, maintenance, and repair; and a parts list
providing a listing of repair parts.
The manual is written with the experienced sheet metal operator in mind. The
operator should be familiar with tooling, machine setup, materials, work methods,
and setup and finished product inspection. Experienced operators not familiar with
the equipment covered will be able to set up and run the machine from the manual.
Novice operators can be trained from the manual, but additional instruction may
be needed.
It is strongly recommended that anyone using the equipment covered read the
manual thoroughly, and understand the material presented.
The setup and operating instructions are based on the intended application of the
machine as defined by Roper Whitney. Use of the machine for other applications
is not precluded, but use for purposes specifically excluded is not recommended,
and may void warranty provisions.
Material in this manual is confidential, and Roper Whitney reserves all rights in this
regard.
If you have questions concerning usage or operating techniques not covered by
this manual, or if you encounter maintenance or repair problems, Roper Whitney
field service and product support personnel can provide you with assistance.
Before calling, please obtain the following information:
* machine type
* machine serial number
* description of application you wish to attempt
* description of problem you have encountered
Contact:
Roper Whitney of Rockford, Inc.
2833 Huffman Boulevard
Rockford, Illinois 61103
Phone: 815/962-3011
Fax: 815/962-2227
CONTENT
ADDITIONAL
ASSISTANCE
INFORMATION
USAGE
AUDIENCE
Содержание 1016
Страница 2: ......
