Manual Brake Installation, Operation, and Maintenance Manual
Page 7
Using the overhead crane, lift the brake from the skid and place it in its desired
location. Be sure the brake is properly balanced.
SETTING THE
BRAKE
WARNING
THE BRAKE TENDS TO BE TOPHEAVY AND CAN TWIST
IN THE SLING
Use care when moving the brake from the skid to avoid injury.
Figure 2. The proper lifting method for moving the brake.
Raise the upper beam to its maximum height using the eccentric lifting levers. Place an
accurate spirit-level on the bed at each end of the bed bar.
Shim under the legs of the brake until the bed bar shows the machine is level front-to-
rear. This will remove any twist from the bed. Side-to-side leveling is not necessary to
proper operation of the brake.
Anchor the leveled brake to the floor using 1/2-inch lag screws or bolts through the leg
mounting holes. Tighten securely, making sure pressure is exerted on the leveling shims.
LEVELING THE
BRAKE
ANCHORING THE
BRAKE
Содержание 1016
Страница 2: ......
