USER MANUAL
17
The carbon brush can be removed by removing the cap cover (9), cap
rubber and brush cap in that order at the interior
To replace carbon brush reverse order of removal.
brush carton
.
INSTALLING BITS
Never hold the chuck body with one hand and use the chisel power to
the chisel body to loosen or tighten bits. You may severely injure your
hand.
WARNING!
Have you read “POWER TOOL SAFETY”, “DRILL SAFETY” and
“SYMBOLS” on pages 4,5 & 6 of this manual? If not, please do it now
before you operate this drill. Your safety depends on it!
Every time you use the drill you should verify the following:
1) Hex bit is secure.
2) Oil level is full.
3) Select to the function you want to do before you engage in the
proposed operation
4) All safety apparel. Safety Glasses Safety Shoes. Safety Gloves. Ear
Defenders and Safety Hat are being worn.
Failure to adhere to these safety rules can greatly increase the chances
of injury.
WARNING!
Be prepared for binding and bit breakthrough. When these situations
occur, the chisel bit has the tendency to grab the workpiece.
This action will kick the chisel opposite to the direction of chisel bit
