Ronix 2702V Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 20

background image

4

ROTARY HAMMER

Wear safety shoes

Wear hard hat

Save these instructions for reference

SAVE THESE INSTRUCTIONS FOR REFERENCE

POWER TOOL SAFETY

.

GENERAL SAFETY RULES

WARNING!

Read all instructions Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
The term “power tool” in all of the warnings listed below refers to your mains
operated (corded) power tool or battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS

.

WORK AREA

Keep work area clean and well lit. Cluttered and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks,
which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.

.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces such as pipes,

«
1
2
3
4
5
...
»

Содержание 2702V





















Отзывы:

Нет отзывов

Похожие инструкции для 2702V

Бренд: Casals Страницы: 68

Бренд: Baumr-AG Страницы: 8

Hammer Delta VH 30

Бренд: Vogt Страницы: 18

Бренд: Far Tools Страницы: 42

Бренд: Makita Страницы: 20

Бренд: Hitachi Страницы: 6

Бренд: Black & Decker Страницы: 2

Бренд: Black & Decker Страницы: 2

Бренд: Berner Страницы: 35

Бренд: Stanley Страницы: 16

Бренд: Stanley Страницы: 18

Бренд: Stanley Страницы: 28

Бренд: BorMann Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды