USER MANUAL
13
.
PRECAUTIONS ON USING ELECTRIC HAMMER CHISEL
1) Before using the electric hammer chisel always make sure the oil
supply is to the full level and the screw is tight.
2) This electric hammer chisel has a fixed handle always make sure
the screws holding the handle are secure before operation takes place.
Always use both hands when using this chisel failure to adhere to this
could invite injuries.
3) Safe operation, always make sure you have a stable posture and safe
footing before operating the electric hammer chisel.
4) When working at a high level, always make sure that no person or
persons are below you, as this could invite injuries to those persons
under you.
5) Before starting any job like breaking, chipping a wall, floor or ceiling,
thoroughly confirm that no items such as an electric cable, water pipe or
conduit are buried inside as this could cause injury or flooding.
6) Properly set the bit holder.
7) The bit can become very hot during operation exercise extreme
caution as this could cause injury.
8) Always wear protective safety glasses.
9) Always wear ear defenders or earplugs.
10) Always wear suitable dust mask.
11) Always wear protective footwear.
12) Always wear hardhat.
.
INFORMATION ON HOW TO USE THE ELECTRIC HAMMER CHISEL
Prior to operation
1) Power source
Ensure that the power source to be utilized conforms to the power
requirements specified on the product nameplate.
2) Grounding
This tool should be grounded while in use to protect the operator from
electric shock.
The tool is equipped with a three-conductor cord and grounding type
