12
ROTARY HAMMER
WARNING!
The electric hammer chisel continues for a few second after the trigger
has been release, be careful when putting it down.
Fitting a chisel bit into the Hex housing.
1
3
2
1
Put the bit into the hex housing and clamp the bit by turning the stop
lever half a turn anti clockwise. This will lock the bit in place.
Do not use the chisel until you are satisfied the bit is secured.
3
This electric hammer chisel does not have reverse direction, so always
take care not to force the chisel in case the chisel bit gets stuck. Always
make sure you keep the chisel going in and out to remove debris.
This chisel does not have torque facility. It is not recommended to use
any other bit other than masonry or chisels do not use metal cutting
drills, this could cause serious injury.
NOTE:
chiseling for an extended period of time may cause the chisel motor to
overheat. If the chisel gets hot, stop chiseling and allow it to cool for at
least 15 minutes.
