24
Operating the appliance
Filling the glass
•
•
•
•
Star
•
•
•
Operating the appliance
NOTE:
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
gasket are fitted well and the blade wa
NOTE:
If the
electronic system recognizes an operating error.
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
For remedy simply
Filling the glass
The appliance must be switched
plug.
Remove the
Fill the glass
Place the top cover
spout.
Starting/stopping the appliance
Before plugging the appliance in, make sure that the
Connect the appliance to the mains, now the unit is in the standby
pilot lamp behind the decorative ring.
Now turn the rotary knob to ON
of the function buttons.
Operating the appliance
•
The appliance is designed for a max. continuous operation time
of 2 minutes. If this time has been reached, the
cool down for at least 10 minutes. If this is not observed, the
motor might be damaged!
•
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
•
Attention
motor stop
glass jar before it has stopped!
•
Attention
blade
objects!
•
Attention
cover. Only work with top cover closed firmly!
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
gasket are fitted well and the blade wa
If the power plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
electronic system recognizes an operating error.
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
simply unplug the appliances a
Filling the glass jar
The appliance must be switched
Remove the top cover from the glass
Fill the glass jar with food
Place the top cover with attached measuring cup
ting/stopping the appliance
Before plugging the appliance in, make sure that the
Connect the appliance to the mains, now the unit is in the standby
pilot lamp behind the decorative ring.
Now turn the rotary knob to ON
of the function buttons.
Operating the appliance
The appliance is designed for a max. continuous operation time
of 2 minutes. If this time has been reached, the
cool down for at least 10 minutes. If this is not observed, the
motor might be damaged!
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
Attention: H
motor stop –
glass jar before it has stopped!
Attention: H
blade – neither stir in the glass jar with a spoon or other
objects!
ention: H
cover. Only work with top cover closed firmly!
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
gasket are fitted well and the blade wa
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
electronic system recognizes an operating error.
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
unplug the appliances a
The appliance must be switched off. For this
from the glass jar
with food (observe the max. filling quantity
with attached measuring cup
ting/stopping the appliance
Before plugging the appliance in, make sure that the
Connect the appliance to the mains, now the unit is in the standby
pilot lamp behind the decorative ring.
Now turn the rotary knob to ON-position and the unit is in
The appliance is designed for a max. continuous operation time
of 2 minutes. If this time has been reached, the
cool down for at least 10 minutes. If this is not observed, the
motor might be damaged!
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
: Hazard of inj
– therefore, do not remove the top cover from the
glass jar before it has stopped!
: Hazard of injury!
neither stir in the glass jar with a spoon or other
: Hazard of injury!
cover. Only work with top cover closed firmly!
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
gasket are fitted well and the blade was screwed in firmly
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
electronic system recognizes an operating error. Another operating error is recognized if the
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
unplug the appliances and turn the rotary knob to OFF
. For this turn the r
jar.
bserve the max. filling quantity
with attached measuring cup on the glass jar and
Before plugging the appliance in, make sure that the
Connect the appliance to the mains, now the unit is in the standby
pilot lamp behind the decorative ring.
position and the unit is in
The appliance is designed for a max. continuous operation time
of 2 minutes. If this time has been reached, the
cool down for at least 10 minutes. If this is not observed, the
motor might be damaged!
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
azard of injury!
therefore, do not remove the top cover from the
glass jar before it has stopped!
azard of injury!
neither stir in the glass jar with a spoon or other
azard of injury!
cover. Only work with top cover closed firmly!
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
s screwed in firmly!
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
Another operating error is recognized if the
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
nd turn the rotary knob to OFF
turn the rotary knob to the left to OFF
bserve the max. filling quantity!).
on the glass jar and
Before plugging the appliance in, make sure that the rotary knob is in OFF
Connect the appliance to the mains, now the unit is in the standby
position and the unit is in ON-mode
The appliance is designed for a max. continuous operation time
of 2 minutes. If this time has been reached, the
cool down for at least 10 minutes. If this is not observed, the
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
ury!
The appliance has a delayed
therefore, do not remove the top cover from the
glass jar before it has stopped!
azard of injury!
Do not touch the running
neither stir in the glass jar with a spoon or other
azard of injury!
Mind a secure fitting of the
cover. Only work with top cover closed firmly!
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
Another operating error is recognized if the
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
nd turn the rotary knob to OFF-position.
otary knob to the left to OFF
on the glass jar and press it on firmly. The plastic lip must cover the
knob is in OFF-position
Connect the appliance to the mains, now the unit is in the standby-mode, displa
mode, displayed by a blinking of the 3 LED pilot lamps
The appliance is designed for a max. continuous operation time
of 2 minutes. If this time has been reached, the
cool down for at least 10 minutes. If this is not observed, the
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
The appliance has a delayed
therefore, do not remove the top cover from the
Do not touch the running
neither stir in the glass jar with a spoon or other
Mind a secure fitting of the
cover. Only work with top cover closed firmly!
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
Another operating error is recognized if the
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
position.
otary knob to the left to OFF-position and disconnect the power
press it on firmly. The plastic lip must cover the
position!
mode, displayed by a permanently glowing LED
, displayed by a blinking of the 3 LED pilot lamps
The appliance is designed for a max. continuous operation time
of 2 minutes. If this time has been reached, the appliance has to
cool down for at least 10 minutes. If this is not observed, the
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
The appliance has a delayed
therefore, do not remove the top cover from the
Do not touch the running
neither stir in the glass jar with a spoon or other
Mind a secure fitting of the
cover. Only work with top cover closed firmly!
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
Another operating error is recognized if the jug is lifted at a rotary
knob position other than “OFF”. This safety function averts an unintended activation of the appliance.
position and disconnect the power
press it on firmly. The plastic lip must cover the
yed by a permanently glowing LED
, displayed by a blinking of the 3 LED pilot lamps
The appliance is designed for a max. continuous operation time
appliance has to
cool down for at least 10 minutes. If this is not observed, the
Prior to each use make sure the blade unit and the gasket are
positioned correctly and the blade unit got screwed in tightly!
The appliance has a delayed
therefore, do not remove the top cover from the
Do not touch the running
neither stir in the glass jar with a spoon or other
Mind a secure fitting of the
Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
jug is lifted at a rotary
position and disconnect the power
press it on firmly. The plastic lip must cover the
yed by a permanently glowing LED
, displayed by a blinking of the 3 LED pilot lamps
The appliance is designed for a max. continuous operation time
appliance has to
plug is connected to the mains (with rotary knob in ON position or in between MIN and MAX), the
position and disconnect the power
press it on firmly. The plastic lip must cover the
yed by a permanently glowing LED
, displayed by a blinking of the 3 LED pilot lamps
