•
•
•
•
•
•
•
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
where inflammable liquids or gases are located.
Prior to switching the appliance on make sure that
… the appliance is
rubber gasket
… on the blade unit before the
glass
… the
… the
cup sticks correctly in the
In order to avoid spilling over, t
This applies especially when working with high speed
When processing hot (max. 60 °C) and foaming liquids, the glass
be filled with max. 1.2 l to avoid possible spilling over
In case the blade is
the power
Do not at all operate this unit with an external timer or a separate
telecontrol system
Avoid any no
•
Be careful when processing liquids. Liquids may spout
during opera
hot liquids
•
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
where inflammable liquids or gases are located.
Prior to switching the appliance on make sure that
the appliance is
rubber gasket
on the blade unit before the
glass jar.
the blade unit is tightly screwed together with the glass
the cover is firmly placed on the glass
cup sticks correctly in the
In order to avoid spilling over, t
This applies especially when working with high speed
When processing hot (max. 60 °C) and foaming liquids, the glass
be filled with max. 1.2 l to avoid possible spilling over
In case the blade is
power plug.
Do not at all operate this unit with an external timer or a separate
telecontrol system
Avoid any no-load operation and do not handle it
Be careful when processing liquids. Liquids may spout
during opera
hot liquids
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
where inflammable liquids or gases are located.
Prior to switching the appliance on make sure that
the appliance is assembled
rubber gasket – it must always be placed.
on the blade unit before the
.
blade unit is tightly screwed together with the glass
cover is firmly placed on the glass
cup sticks correctly in the
In order to avoid spilling over, t
This applies especially when working with high speed
When processing hot (max. 60 °C) and foaming liquids, the glass
be filled with max. 1.2 l to avoid possible spilling over
In case the blade is blocked, switch off the appliance immediately and pull
plug. Remove
Do not at all operate this unit with an external timer or a separate
telecontrol system.
load operation and do not handle it
Be careful when processing liquids. Liquids may spout
during operation. There is the hazard of burns with
hot liquids!
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
where inflammable liquids or gases are located.
Prior to switching the appliance on make sure that
assembled
it must always be placed.
on the blade unit before the
blade unit is tightly screwed together with the glass
cover is firmly placed on the glass
cup sticks correctly in the
In order to avoid spilling over, the
This applies especially when working with high speed
When processing hot (max. 60 °C) and foaming liquids, the glass
be filled with max. 1.2 l to avoid possible spilling over
cked, switch off the appliance immediately and pull
Remove the blocking ingredients only afterwards
Do not at all operate this unit with an external timer or a separate
load operation and do not handle it
Be careful when processing liquids. Liquids may spout
tion. There is the hazard of burns with
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
where inflammable liquids or gases are located.
Prior to switching the appliance on make sure that
assembled correctly. This applies especially for the
it must always be placed.
on the blade unit before the blade unit is screwed together with the
blade unit is tightly screwed together with the glass
cover is firmly placed on the glass
cup sticks correctly in the cover.
he glass jar
This applies especially when working with high speed
When processing hot (max. 60 °C) and foaming liquids, the glass
be filled with max. 1.2 l to avoid possible spilling over
cked, switch off the appliance immediately and pull
the blocking ingredients only afterwards
Do not at all operate this unit with an external timer or a separate
load operation and do not handle it
Be careful when processing liquids. Liquids may spout
tion. There is the hazard of burns with
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
where inflammable liquids or gases are located.
Prior to switching the appliance on make sure that
correctly. This applies especially for the
it must always be placed.
blade unit is screwed together with the
blade unit is tightly screwed together with the glass
cover is firmly placed on the glass jar and the small measur
jar may be filled with max. 1.5 l.
This applies especially when working with high speed
When processing hot (max. 60 °C) and foaming liquids, the glass
be filled with max. 1.2 l to avoid possible spilling over
cked, switch off the appliance immediately and pull
the blocking ingredients only afterwards
Do not at all operate this unit with an external timer or a separate
load operation and do not handle it
Be careful when processing liquids. Liquids may spout
tion. There is the hazard of burns with
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive en
Prior to switching the appliance on make sure that …
correctly. This applies especially for the
blade unit is screwed together with the
blade unit is tightly screwed together with the glass
and the small measur
may be filled with max. 1.5 l.
This applies especially when working with high speed.
When processing hot (max. 60 °C) and foaming liquids, the glass
be filled with max. 1.2 l to avoid possible spilling over.
cked, switch off the appliance immediately and pull
the blocking ingredients only afterwards
Do not at all operate this unit with an external timer or a separate
load operation and do not handle it with hands wet
Be careful when processing liquids. Liquids may spout
tion. There is the hazard of burns with
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vicinity of sources of heat (oven, gas flame etc.) or in explosive environments
correctly. This applies especially for the
blade unit is screwed together with the
blade unit is tightly screwed together with the glass ja.
and the small measur
may be filled with max. 1.5 l.
When processing hot (max. 60 °C) and foaming liquids, the glass jar
cked, switch off the appliance immediately and pull
the blocking ingredients only afterwards.
Do not at all operate this unit with an external timer or a separate
with hands wet.
Be careful when processing liquids. Liquids may spout
tion. There is the hazard of burns with
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vironments
correctly. This applies especially for the
blade unit is screwed together with the
.r
and the small measuring
may be filled with max. 1.5 l.
jar should
cked, switch off the appliance immediately and pull
Do not at all operate this unit with an external timer or a separate
19
Be careful when processing liquids. Liquids may spout
Hot liquids of more than 60 °C must not be processed!
Place the appliance on a stable and even surface and do not operate it in the
vironments
blade unit is screwed together with the
should
cked, switch off the appliance immediately and pull
